Autor Wątek: Opus Discovery  (Przeczytany 86210 razy)

Maryjan

  • *****
  • Wiadomości: 6650
  • Miejsce pobytu:
    Skarżysko-Kam.
  • Scotch whiskey and West Highland Terrier
Odp: Opus Discovery
« Odpowiedź #390 dnia: 2020.08.18, 18:29:22 »
Congratulations!
Now you can have fun like in the old days.
I am glad that the Opus Discovery clone will be used and will bring satisfaction to its owner.
Have fun :)
"Co miałem powiedzieć - przeczytałem..." Nikodem Dyzma

dicesare

  • *
  • Wiadomości: 23
  • Miejsce pobytu:
    Italy
Odp: Opus Discovery
« Odpowiedź #391 dnia: 2020.08.19, 22:17:00 »
Dear friends,
my Opus clone is working fine and I can read again almost all the old important discs I had.

At this point I would like to be able to copy them on .OPD images to keep them safe and be able to use on some emulator.
So in addition to the original 180K drive, I also connected a Gotek drive with FlashFloppy firmware. On Gotek I put a pendrive with some blank images created with an emulator.

I thought a flat cable with two connectors and a correct AB / BA jumper setting was sufficient.
In reality I have not found a working configuration with which to access the contents of the different discs.
So I tried different combination of S0 and S1 pin drives. And some for AB/BA.... Nothing

At last I used a flat cable for PC (that is a classic flat cable with the 5 inverted wires on the first connector) and with the configuration drawn in the diagram that I attach, I can read the contents of the different discs.
So I loaded the Disc Manger program to copy the files from the real disc (disc 1) to Gotek (disc 2), but when copying, when it accesses disc 2 it gives me the error "E write protected".

I tried to understand if this error was due to the empty image I had created or to the pendrive that contains it (I remember that unit 2 is a Gotek).
If I connect the Gotek, as the only disc, I can write inside the image without any problem.
Am I doing something wrong?

I seem to remember that Zaxon made a setup similar to mine with a real drive and Gotek and it seems to work.
Can you confirm the type of flat cable to use and the S0 / S1 settings on the individual drives?

Please, can you help me?
Thank you

Claudio

dicesare

  • *
  • Wiadomości: 23
  • Miejsce pobytu:
    Italy
Odp: Opus Discovery
« Odpowiedź #392 dnia: 2020.08.20, 22:07:01 »
Dear friends,
I answer myself :-)

To connect two drives you need:
- A straight flat cable: those for PCs don't work.
- One drive must be set as S0 (drive 1) and the other as S1 (drive 2).
- By changing the orientation of the AB / BA jumpers, drive 1 can be swapped with 2 and vice versa.

So I solved it and now it starts to recover the old disks, making .OPD images

Thanks again

Claudio

R-Tape

  • **
  • Wiadomości: 80
  • Miejsce pobytu:
    Konstantynów Łódzki
Odp: Opus Discovery
« Odpowiedź #393 dnia: 2020.08.31, 02:27:51 »
I thought a flat cable with two connectors and a correct AB / BA jumper setting was sufficient.
In reality I have not found a working configuration with which to access the contents of the different discs.
So I tried different combination of S0 and S1 pin drives. And some for AB/BA.... Nothing

At last I used a flat cable for PC...

To connect two drives you need:
- A straight flat cable: those for PCs don't work.
- One drive must be set as S0 (drive 1) and the other as S1 (drive 2).
- By changing the orientation of the AB / BA jumpers, drive 1 can be swapped with 2 and vice versa.

Dicesare, I don't understand. That configuration (not PC-flat cable, S0-S1 pin drives, AB/BA jumper ) work correctly or not?
I want connect FlashFloppy Gotek to Opus so your trials are helpful.

I found program to write .opd images to floppy disks on PC:
https://simonowen.com/samdisk//formats/
« Ostatnia zmiana: 2020.08.31, 03:03:44 wysłana przez R-Tape »

dicesare

  • *
  • Wiadomości: 23
  • Miejsce pobytu:
    Italy
Odp: Opus Discovery
« Odpowiedź #394 dnia: 2020.08.31, 09:08:59 »
Dear R-Type

My last configuration (that of August 20) was full working, I summarize for a clarity

- Straight data cable for both drives (no cross wires)
- My setup have drive 1 as Gotek (S0 set on this drive) and drive 2 as original 180k Opus drive (S1 set on this drive)
- AB/BA jumper set horizontal as to the edge connector. If you need to swap drive 1 with drive 2 set the jumper vertical as to the edge connector.

>I found program to write .opd images to floppy disks on PC:
>https://simonowen.com/samdisk//formats/

Thanks I already knew it.
I'm dumping my old 180k floppy I used years ago, I was working with patience and IPA (to wash floppy surface)!

If you need some other info, ask me!
Good luck!

Claudio

R-Tape

  • **
  • Wiadomości: 80
  • Miejsce pobytu:
    Konstantynów Łódzki
Odp: Opus Discovery
« Odpowiedź #395 dnia: 2020.09.01, 13:19:52 »
thanks Dicesare, I'll try to  connect gotek but first I need to find correct ribbon cable.

Maryjan

  • *****
  • Wiadomości: 6650
  • Miejsce pobytu:
    Skarżysko-Kam.
  • Scotch whiskey and West Highland Terrier
Odp: Opus Discovery
« Odpowiedź #396 dnia: 2021.02.16, 11:02:15 »
Claudio created a page with a description of the clone http://www.claudiodicesare.it/2020/09/25/un-clone-dellopus-discovery-per-zx-spectrum/
It contains a lot of information about this project and a description of the whole.
Thank you very much for such a professional approach to the subject :)
"Co miałem powiedzieć - przeczytałem..." Nikodem Dyzma

dicesare

  • *
  • Wiadomości: 23
  • Miejsce pobytu:
    Italy
Odp: Opus Discovery
« Odpowiedź #397 dnia: 2021.02.18, 22:59:22 »
Dear friends, the second part of the clone assembly report is now online

http://www.claudiodicesare.it/2021/02/18/un-clone-dellopus-discovery-per-zx-spectrum-parte-2/

Claudio

KWF

  • *****
  • Wiadomości: 6823
  • Miejsce pobytu:
    trzecia planeta od Słońca
  • "I co ja robię tu, u-u, co Ty tutaj robisz ..."
    • Insta do lasownia
Odp: Opus Discovery
« Odpowiedź #398 dnia: 2021.07.29, 11:49:40 »
Ponad 1500 stron dla milosnikow Opusa i nie tylko: Spectrum Discovery Club Newsletter 1-42 (1987-1995)
KWF
-----
R Tape loading error 0:1
Moje zabawki: https://github.com/McKlaud76

Maryjan

  • *****
  • Wiadomości: 6650
  • Miejsce pobytu:
    Skarżysko-Kam.
  • Scotch whiskey and West Highland Terrier
Odp: Opus Discovery
« Odpowiedź #399 dnia: 2021.07.29, 13:52:26 »
Dzięki.
Jest trochę do poczytania :)
"Co miałem powiedzieć - przeczytałem..." Nikodem Dyzma

KWF

  • *****
  • Wiadomości: 6823
  • Miejsce pobytu:
    trzecia planeta od Słońca
  • "I co ja robię tu, u-u, co Ty tutaj robisz ..."
    • Insta do lasownia
Odp: Opus Discovery
« Odpowiedź #400 dnia: 2022.05.09, 06:13:56 »
@Maryjan: Tondose (Waldemar) złożył i uruchomił swojego klona Opusa. Przesyła podziękowania za płytki oraz zdjęcia klona.
KWF
-----
R Tape loading error 0:1
Moje zabawki: https://github.com/McKlaud76

Maryjan

  • *****
  • Wiadomości: 6650
  • Miejsce pobytu:
    Skarżysko-Kam.
  • Scotch whiskey and West Highland Terrier
Odp: Opus Discovery
« Odpowiedź #401 dnia: 2022.05.09, 08:33:00 »
Tylko pogratulować :)
Ciekawy styl obudowy.

Cieszę się, że w jakiś sposób ludzie używają tego, co uratuję od zapomnienia.
"Co miałem powiedzieć - przeczytałem..." Nikodem Dyzma

damik

  • Fresh rosin sniffer ;)
  • *****
  • Wiadomości: 2426
  • Miejsce pobytu:
    Generalnie Polska, głównie Bytom czasem Bielsko-Biała oraz okolice
  • ZX'owy i nie tylko...
Odp: Opus Discovery
« Odpowiedź #402 dnia: 2022.05.10, 00:11:16 »
@Maryjan, to naprawdę dobra robota z tym Opusem, dzięki temu możemy się cieszyć w zasadzie unikalnym sprzętem za przystępną cenę  8)
U mnie działa to doskonale już od dawna dzięki przesłanym przez Ciebie odtworzonym PCB w nieco poprawionej wersji.  :D

Kolega Tondose (Waldemar), mógłby jeszcze zakleić sobie okienko EPROM'a, by mu z czasem jakieś bity przypadkiem nie uleciały ;)

A ten koncept obudowy na pewno jest bardzo ciekawy i zainspirował mnie do "ogacenia" też i mojego IF  ;D
« Ostatnia zmiana: 2022.05.10, 00:25:27 wysłana przez damik »
Wszystkiego po trochu: Schwarz, mydło i powidło... konsole, stare i nieco nowsze komputery oraz akcesoria i duperele.

jackfinch

  • ****
  • Wiadomości: 426
  • Miejsce pobytu:
    uk
Odp: Opus Discovery
« Odpowiedź #403 dnia: 2022.10.30, 02:39:06 »
Współpraca Opus Discovery 1 z interfejsem Videoface.
https://www.youtube.com/watch?v=vFjggzVwNzk

Maryjan

  • *****
  • Wiadomości: 6650
  • Miejsce pobytu:
    Skarżysko-Kam.
  • Scotch whiskey and West Highland Terrier
Odp: Opus Discovery
« Odpowiedź #404 dnia: 2022.11.24, 22:53:34 »
Standaryzując projekty swoich interface dyskowych dla ZX Spectrum przeprojektowałem płytkę w celu montażu nad nią napędu fdd 3`5.
Ot, tak teraz to wygląda.
"Co miałem powiedzieć - przeczytałem..." Nikodem Dyzma