forum speccy.pl
Witamy,
Gość
.
Zaloguj się
lub
zarejestruj
.
1 Godzina
1 Dzień
1 Tydzień
1 Miesiąc
Zawsze
Zaloguj się podając nazwę użytkownika, hasło i długość sesji
Aktualności:
Strona główna
Pomoc
Regulamin
Szukaj
Zaloguj się
Rejestracja
Archiwum ZX
WIKI
PORTAL
forum speccy.pl
»
Komputery z Z80
»
TIMEX
(Moderator:
KWF
) »
Timex 2048 and DivMMC from Future Was 8bit
« poprzedni
następny »
Drukuj
Strony: [
1
]
Do dołu
Autor
Wątek: Timex 2048 and DivMMC from Future Was 8bit (Przeczytany 1613 razy)
Powervr
Wiadomości: 26
Miejsce pobytu:
França
Timex 2048 and DivMMC from Future Was 8bit
«
dnia:
2023.08.23, 15:39:03 »
Weird... It works nicely, then if I turn the computer off...and again on.... it doesn't work, or it works with flaws...
Question: Some caps on the divmmc giving an bad time for the bus of the timex? after 1-2 minutes it will start to work again ...
I reproduced this on 2 different timex 2048. not able to reproduce it on timex 2068.
Zapisane
Maryjan
Wiadomości: 6666
Miejsce pobytu:
Skarżysko-Kam.
Scotch whiskey and West Highland Terrier
Odp: Timex 2048 and DivMMC from Future Was 8bit
«
Odpowiedź #1 dnia:
2023.08.23, 21:48:51 »
There are many versions of DivMMC.
I don't know which version you have, but your problem may be caused by an unstable clock. Or the reason could be simple, the edge connector is dirty.
After so many years, every computer needs an overhaul.
Zapisane
"Co miałem powiedzieć - przeczytałem..." Nikodem Dyzma
KWF
Moderator
Wiadomości: 6839
Miejsce pobytu:
trzecia planeta od Słońca
"I co ja robię tu, u-u, co Ty tutaj robisz ..."
Odp: Timex 2048 and DivMMC from Future Was 8bit
«
Odpowiedź #2 dnia:
2023.08.24, 11:02:05 »
DivMMC Future from TFW8 does not rely on the clock signal available on the edge connector.
Zapisane
KWF
-----
R Tape loading error 0:1
Moje zabawki:
https://github.com/McKlaud76
Drukuj
Strony: [
1
]
Do góry
« poprzedni
następny »
forum speccy.pl
»
Komputery z Z80
»
TIMEX
(Moderator:
KWF
) »
Timex 2048 and DivMMC from Future Was 8bit